| External requirements: | Compact SnowCuber: | SnowCuber MK6: |
| Min. front linkage lifting force | 25 kN (cat 2) | 50 kN (cat 2/3) |
| Min. rear linkage lifting force | 20 kN (cat 2) | |
| Min. Power tractor | 105 kW (143 hp) | 192 kW (260 hp) |
| Min. Power Take Off (PTO) | 90 kW (122 hp) | 147 kW (200 hp) |
| PTO-driveshaft connection | 1-3/8″ Z6 Spline shaft | 1-3/8″ Z6 Spline shaft CCW rotation |
| PTO shaft speed | 1.000 n/min | 1.000 n/min |
| Electric supply | 12 VDC | 12 VDC |
| Controls | ISOBUS conform ISO 11783-2 | ISOBUS conform ISO 11783-2 |
| | |
| HPU: | | |
| HPU: Max. working pressure | 260 bar | 200 bar |
| HPU: Max. output flow | 187 l/min | 20 l/min |
| | |
| HPU dimensions: | | |
| HPU: Overall length | 1.200 mm | |
| HPU: Overall width | 1.480 mm | |
| HPU: Overall height incl. pedestal | 1.775 mm | |
| HPU: Mass excl. fluids | 875 kg | |
| HPU: Mass incl. fluids | 1.200 kg | |
| HPU: Hydraulic oil tank capacity | 500 L | 58 L |
| HPU: Hydraulic oil tank max. filling volume | 350 L | 40 L |
| HPU: Hydraulic oil/air cooler cooling max. capacity | 35 kW (air temp. 0 °C) | 12 kW (air temp. 0 °C) |
| | |
| HPU hydraulic connections: | | |
| HPU: Hydraulic connection Pressure (P) | Quick connector 9402-20-1 1/4″ Male | Quick connector ISO 7241-1-A 1/2″ Male |
| HPU: Hydraulic connection Tank (T) | Quick connector 9401-20-1 1/4″ Female | Quick connector ISO 7241-1-A 1/2″ Male |
| HPU: Hydraulic connection Load Sense (LS) | Quick connector 9401-06-3/8″ Female | |
| HPU: Hydraulic connection Drain (D) | Quick connector F Firg 12 BSP1/2″ (9415-08) Female | |
| HPU: Hydraulic tank oil filling point | Quick connector 1/2″ FASTER NV12 Male | |
| | |
| HPU electric connections: | | |
| HPU: Controls | ISOBUS conform ISO 11783-2 | |
| HPU: Emergency stop | 12V Harting 4P Serie Han-A | |
| HPU: Lighting | 7P connector conform DIN ISO 1724 | 7P connector conform DIN ISO 1724 |
| | |
| | |
| Length | 2.550 mm | 2.261 mm |
| Max. width in operating position (snow outlet slide fully extended) | 4.480 mm | 6.399 mm |
| Max. width in transport position | 2.470 mm | 4.027 mm |
| Max. height | 3.790 mm | 2.683 mm |
| Max. working width | 1.870 mm | 3.200 mm |
| Diameter impellor | 900 mm | 1.300 mm |
| Mass no options | 1.815 kg | 3.800 kg |
| Mass full options (snow outlet slide 180° rotatable and 500 mm extended) | 1.990 kg | |
| | |
| Compact SnowCuber hydraulic connections: | | |
| Hydraulic connection Pressure (P) | Quick connector 9402-20-1 1/4″ Male | |
| Hydraulic connection Tank (T) | Quick connector 9401-20-1 1/4″ Female | |
| Hydraulic connection Load Sense (LS) | Quick connector 9402-06-3/8″ Male | |
| Hydraulic connection Drain (D) | Quick connector M Firg 12 BSP1/2″ (9416-08) Male | |
| | |
| Compact SnowCuber electric connections: | | |
| Controls | ISOBUS conform ISO 11783-2 | |
| | |
| Operating and environmental conditions: | | |
| Recommended hydraulic fluid quality | HVLP ISO-VG46 according to DIN 51502, DIN 51524-3 and ISO 6743-4 | |
| Hydraulic fluid temperature range | + 20 to 55 °C for continuous operation | |
| Hydraulic fluid temperature max. | + 70 °C | |
| Recommended oil cleanliness level | 19/16/13 or better according to ISO 4406 | |
| Viscosity (continuous operation) | 20 to 100 mm2/s (cSt) | |
| Viscosity (maximum intermittent) | 500 mm2/s (cSt) | |
| Ambient temperature | -20 to +5 °C | -20 to +5 °C |
| Relative humidity degree | < 95% | |
| Max. snow height | 600 mm | |
| Max. slope of working area in all directions | 15° | 15° |
| Max. speed during snow removal operation | 5 km/h | 5 km/h |
| Max. speed during movements | 25 km/h | 25 km/h |
| | |
| | |
English 
German